Skip to main content

Configure contact sensors

Once you have configured your controller, you can further expand your Kisi setup by adding contact sensors to it.

For a visual guide on installing the contact sensor and configuring it in Kisi, please watch the video below. For step-by-step instructions on configuring the software, use the tabs below.

  1. Sign in to Kisi
  2. Navigate to Places and select the place where you want to configure the contact sensor for
  3. Navigate to Hardware in the left-hand menu and select Controllers
  4. Select the Controller Pro 1.1 that has the contact sensor wired to
  5. Scroll down and click on Contact sensors
  6. Select the input that has the contact sensor wired to
  7. Under Search door, select the door the contact sensor is mounted to
  8. Make sure you enable it
  9. Under Unlock duration, define how long the contact sensor should wait after an Unlock event before triggering a Held open event
  10. Click Save

Remove contact sensors

You can anytime disable your contact sensors using the same Hardware tab.