Skip to main content

Assign door to controller

Now that your place has its dedicated controller, you can go ahead and assign a door to it. You controller will be responsible for this door.

Based on how do you control your door (with a Kisi Controller Pro 1 or through a Kisi Controller Pro 2 with Wiegand board), see the instructions on the tabs below.

  1. Navigate to the place where you have the controller assigned
  2. On the place dashboard, click on Hardware
  3. Select the Controllers tab and click the controller you see on the screen
  4. Click on Relays. This corresponds to the numbered relay on the Kisi Controller Pro to which your door was physically wired.
  5. Select the correct relay
  6. Under Edit Relay, select the corresponding door this relay is connected to
  7. Under Duration, define how many seconds the door should remain unlocked
  8. Click Save
info

To remove controllers or readers from a Kisi place, please contact Kisi Support.

On to the next step

You're all set. Now it's time to configure your readers.