Recommended equipment
The following is a list of recommended door security items, including electric locks, low voltage wiring, network cables, external power supply, PoE injector, Ethernet couplers, keypad override, motion sensor, push-to-exit button, contact sensors, and alarm timer.
Use the tabs below or download it as a PDF. For installation instructions, please refer to our guide provided by Kisi Academy.
- How to install an electronic strike lock
- HES 1006 industrial electric strike
- Von Duprin electric strike lock - 4200 Series
The 4200 Series Von Duprin electric strike lock is often installed in combination with the Schlage ND80 storeroom lock.
Magnetic lock
Magnetic lock
Wired mortise lock
Wired mortise lock
Wiring the controller and reader
Wiring the controller and reader
A CAT6 or CAT5 cable will be installed as a direct connection from the reader location to the IT room, where it will be linked to the switch via Power over Ethernet (PoE).
Wiring the lock
Wiring the lock
- Wire a 18-2 gauge low-voltage wiring from the electronic door hardware to the Kisi controller relay positioned in the IT room.
- Find 18-2 gauge cables here
Altronix external power supply
Altronix external power supply
Power over Ethernet plus (PoE+) injector
Power over Ethernet plus (PoE+) injector
Ethernet coupler
Ethernet coupler
Linear weather resistant keypad
Linear weather resistant keypad
Motion sensors and request-to-exit devices
Motion sensors and request-to-exit devices
Assa Abloy push-to-exit with timer
Assa Abloy push-to-exit with timer
Power terminal block
Power terminal block
- TE Connectivity AMP Connectors
- TERM BLOCK PLUG 2POS STR 5.08MM
- Manufacturer Product Number: 796634-2
Seco-Larm Annual Timer
Seco-Larm Annual Timer
Media converter for elevators
Media converter for elevators
Cameras
Cameras
Reader security screw
Reader security screw
For further details visit our website or read our guide on how to install a door access control system.