Integrate Kisi with Cisco Meraki

As a Kisi admin, you can integrate your place with Cisco Meraki's security cameras. Before setting up the integration, make sure you have API access to your Cisco Meraki cameras.

info

This is a Kisi-built integration, maintained and supported by Kisi.

Supported camera models

Our integration exclusively supports Cisco Meraki MV22 and MV32 camera models.

Prerequisites

• a Cisco Meraki account
• Kisi administrator access rights
• a Kisi organization API key
• at least one camera set up in the location

Watch the instructional video below for a visual walkthrough, or scroll down for detailed step-by-step instructions.

Enable API access

1. Sign in to your Cisco Meraki Dashboard as an Administrator
2. Under Organization, click on Settings
3. In the Settings page, scroll down to the Dashboard API access section and check the box Enable access to the Cisco Meraki Dashboard API
4. Click on Save Changes

Generate a Cisco Meraki API key

1. From the Cisco Meraki Dashboard, click on your email address on the top right corner and select My Profile
2. Scroll down to the API access section and click on Generate new API key
3. Copy your Cisco Meraki API key from the popup window, and check the box I have stored my new API key
4. Click Done

Set up the integration in Kisi

1. Sign in to Kisi
2. Navigate to Settings
3. Click on Integrations > Add Integration
4. Enter a name, open the Type dropdown and select Cisco Meraki
5. Paste the Cisco Meraki API key that you previously obtained
6. Open the Search place dropdown and select the place where you want to add the integration
7. Enable the integration
8. Click Add

note

A single integration is enough to create multiple cameras in the same Kisi organization.

Import cameras

info

In Kisi, you can only connect at most one door to a camera, but doors might have multiple cameras associated.

1. On your Kisi place dashboard, click on Hardware and select the Cameras tab
2. Click on Import Camera and select the name of the integration you created above
3. Fill out the requested information
4. Click Import

Supported events for camera snapshots

Once the integration is set up, camera footage will appear in the Event History, marked with a camera icon. Snapshots will be created on the following Kisi events:

• Door unlocked (lock.unlock)
• Door unlock failed (lock.unlock)
• Door opened (lock.opened)
• Door held open (lock.held_open)
• Door forced open (lock.forced_open)

Snapshots may be delayed by up to ten minutes based on how soon they're available through the Cisco Meraki snapshot API, or longer if the API limits of the Cisco Meraki account have been exhausted.

Deassign cameras

1. Sign in to Kisi
2. Navigate to the place where you have your camera assigned
3. On the dashboard, click on Hardware
4. Select the Cameras tab
5. Click on the camera that you wish to deassign
6. Click on Delete camera in the top right corner
7. If you are planning to reassign this camera, click on Copy token to save the device token
8. Click Delete

After deletion, you will receive an email notification confirming that the corresponding camera has been deassigned.