Skip to main content

Configure the Wiegand board

The last step towards a fully functioning Controller Pro 2 setup is to assign a reader and a door to the Wiegand add-on board.

  1. Go to Hardware > Controllers and select your Controller Pro 2
  2. Scroll down and click on Wiegands
  3. Select the Wiegand device interface to which you wired the legacy reader
  4. Open the Type dropdown and select Legacy reader
  5. Open the Search door dropdown and select the door this reader is assigned to

You're almost there!

You have your first place with your first door, and the Kisi hardware assigned to it. It's time to test your Kisi-enabled door!